Filter
Top Products
EN 49
1. COUNTER system
2. Tape counter display
•Displays actual tape position.
ex.
00: 01: 45: 10F
(Hours : Minutes : Seconds : Frames)
3. ID number
•Displays the selected device's ID
number.
4. FILE name
•Displays file name after saving the
program under a new name.
ex. travel
5. POWER button
•Turns the device on and off.
•If power is not supplied to the
camcorder beforehand, you can not turn
the camcorder on and off by clicking
this button.
•Some camcorders cannot be turned on
and off by clicking this button.
6. MEMO
•If you wish to add some comment to the
file, you can input it.
ex. Europe Tour
7. IN/OUT point display
•You can set up to 99 in/out points per
file.
8. START button
•Starts editing. Scenes are recorded in
scene's numerical order. After starting
editing, this button changes to STOP
button.
9. ELAPSED TIME
•Displays the total elapsed time of all the
programmed scenes.
10.Camcorder's operation buttons
•Operate the camcorder.
•To start Reverse/Forward Slow-motion
Search, first click the Pause button and
then the Reverse/Forward Slow button.
•Functions your camcorder does not
have cannot be performed by the above
buttons.
•Click "File" — "Open VCR Control
Window" on menubar to call up the
"VCR Control" window. You can control
the video source unit from this window.
11. MODE display
•Displays the camcorder's mode when
operating the above buttons.
12.SCENE button
•Plays back only one programmed scene
so that you can preview it.
•Operates only the camcorder.
13.IN/OUT point button
•Registers the cut-in and -out points of
the scene you want to dub.
14.Message display
•Displays the connected device mode,
etc.
Stop button
REW/REW Search button
Play button
FF/FF Search button
Pause button
Reverse Slow button
Forward Slow button
To exit from the MOVIE PLAYER
window, choose "Exit" from "File".
NOTE:
If you need the "MOVIE PLAYER HELP"
window, choose "Contents" from "Help".