Filter
Top Products
– 35 –
English
5
Press REC START (inside the sliding panel) .
• If OPC (see page 29) is being performed, “UPDATE
OPC” flashes first in the main display, then recording
starts.
After the first track of the disc on the CD1 tray is
recorded, the first track of the CD on the CD2 tray will
be recorded. (If no disc is on the CD tray, it will be
skipped.)
After the first tracks of all loaded discs are recorded,
First Track Recording stops.
6
Repeat steps 1, 4, and 5 to continuously record more
tracks using First Track Recording.
To confirm the recording contents, see “To change the
display information while recording” on page 32.
To stop recording, press 7. “STOP DUBBING” flashes
for a while.
• Both 3-CD Changer and CD Recorder stop
automatically.
To remove the recorded disc, press 0 CDR.
“FINALIZE ?” flashes in the main display for a while.
• If you do finalize the disc, press FINALIZE.
Remember once you finalize a CD-R, no further
recording can be made on the disc. (For more details, see
“Finalizing a Disc—CD-R/CD-RW” on page 38.)
• If you do not finalize the disc, press 0 CDR again.
If “SHORT REM. OK ?” appears when you press
REC START
There is not enough remaining time left on the recordable disc.
Eject and change a disc or press REC START one more time to
start recording anyway (the entire track cannot be recorded in this
case).
During First Track Recording
Repeat Play will be canceled automatically.
First Track Recording
First Track Recording allows you to record the first track of
each loaded disc in 3-CD Changer.
You can, for example, make a directory of all your best
CDs.
■ Using the REC MODE button ONLY
On the unit ONLY:
1
Prepare discs in 3-CD Changer.
• If the current playing source is not 3-CD changer,
press CD 3 / 8, then 7. To select a disc, press DISC
repeatedly, then 7.
You can also use the remote control. When using it,
press CD1, CD2, or CD3, then 7.
• If the current play mode is either Program Play or
Random Play, press FM/PLAY MODE on the remote
control to select Continuous Play.
2
Insert a recordable CD-R or CD-RW on the CDR
disc tray.
3
Press REC SPEED (inside the sliding panel) if
necessary.
• Each time you press the button, recording speed
alternates between normal speed and high speed*.
* For CD-R, 4 times normal speed; for CD-RW, 2 times
normal speed.
When high speed is selected, recording input level is reset
to “0” temporarily, and will not affect the recording.
4
Press REC MODE (inside the sliding panel) to select
“1st Tr. REC?”
• Each time you press the button, recording modes
change as follows:
Remaining time of the
currently playing track
Remaining time in the
CD-R/CD-RW
CD
-
RW
UNFINALIZE DISC
AUTO TRACK
HIGH SPEED
d
B
REC LEVEL
CD
-
RW
UNFINALIZE DISC
NORMAL
AUTO TRACK
SPEED
d
B
REC LEVEL
321
CD
CD
-
RW
UNFINALIZE DISC
NORMAL
AUTO TRACK
SPEED
REC LEVEL
DIGITAL
REC
Continued
CD
-
RW
UNFINALIZE DISC
NORMAL
AUTO TRACK
SPEED
d
B
REC LEVEL
321
CD
CDR
CD REC & FINALIZE?
=
SET=LISTENING & FINALIZE?
=
CD REC?
=
1st Tr. REC?
=
SET=LISTENING?
=
Canceled
=
(back to the beginning)
EN28-38_NX-CDR7[J_C]_4 01.9.14, 3:42 PM35