Filter
Top Products
– 16 –
English
Selecting the Sound Modes
You can select one of the 5 preset sound modes and 2
manual modes.
• You can use this effect only for playback, but not for
recording.
On the remote control ONLY:
Press SOUND repeatedly until the sound mode you
want appears in the main display.
The SOUND indicator also lights on the display.
• Each time you press the button, the sound modes change
as follows:
D. (Dance) CLUB: Increases resonance and bass.*
HALL: Adds depth and brilliance to the
sound.*
STADIUM: Adds clarity and spreads the sound, like
in an outdoor stadium.*
ROCK: Boosts low and high frequency.
Good for acoustic music.
POP: Good for vocal music.
SET
==
==
=MANUAL1 ?: Your individual mode stored in
memory without surround elements.**
SET
==
==
=MANUAL2 ?: Your individual mode stored in
memory with surround elements.**
FLAT: Cancels the sound mode.
* Surround elements are added to create a being-there feeling.
**See “Creating Your Own Sound Modes—MANUAL Modes” on
the right column.
To check the sound mode currently selected, press
SOUND once while the SOUND indicator is lit.
The currently selected sound mode appears in the main
display.
Creating Your Own Sound Modes
—MANUAL Modes
You can create and store your own sound modes.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
On the remote control ONLY:
1
Press SOUND repeatedly until “SET=MANUAL1 ?”
or “SET=MANUAL2 ?” appears in the main
display.
The SOUND indicator also lights on the display.
SET
==
==
=MANUAL1 ?: Select this when you want to
store your individual mode without surround
elements.
SET
==
==
=MANUAL2 ?: Select this when you want to
store your individual mode with surround
elements.
2
Press SET.
3
Adjust the equalizer pattern.
1) Press ¡ / ¢ or 4 / 1 to select the
frequency range to adjust (LOW, MIDDLE,
HIGH).
2) Press = (+10) or + (10) to adjust the level
(–3 to +3) of the selected frequency range.
3) Repeat steps 1) and 2) to adjust the level of the
other frequency ranges.
4
Press SET again (or wait until the above indication
disappears).
“MEMORY” appears in the main display and the
equalizer pattern you have created is stored in memory.
To use your own sound mode
See “Selecting the Sound Modes” on the left column.
Ex.: When selecting “SET=MANUAL1 ?”
Ex.: When adjusting middle frequency range
NORMAL
SPEED
d
B
REC LEVEL
321
BASS
CD
SOUND
D.CLUB
FLAT
(Canceled)
HALL STADIUM ROCK
POP
SET=MANUAL2 ?
SET=MANUAL1 ?
EN13-16_NX-CDR7[J_C]_4 01.9.14, 3:41 PM16