Filter
Top Products
– 10 –
English
SPEAKERS
CAUTION :
SPEAKER IMPEDANCE
6 16
RL
RL
FM
COAXIAL
LINE IN
LINE OUT
3CD
DIGITAL OUT
LINE
DIGITAL IN
R
L
R
L
AM
LOOP
AM
EXT
(75 )
ANTENNA
OPTICAL
Connecting Other Components
When you connect and use other components, refer also to
the manuals supplied with them.
• DO NOT connect other components while the
power is on.
• DO NOT plug in any component until all
connections are complete.
To connect an analog component such as a cassette
deck
Be sure that the plugs of the audio cords and the jacks on
the rear of the unit are color-coded: White plugs and jacks
are for left audio signals, and red ones for right audio
signals.
You can enjoy playback and recording on the other
connected component.
To input (REC)
By using audio cords (not supplied), connect:
• Between the audio input jacks on the cassette deck and
the LINE OUT jacks.
• Between the audio output jacks on the cassette deck and
the LINE IN jacks.
To output (PLAY)
Ex.: cassette deck
Speaker grille
To remove the speaker grille, inserting your fingers at the
top of the speaker grille, pull towards you. Then pull the
bottom towards you.
To attach the speaker grille, put the projections of the
speaker grille into the holes of the speaker.
Holes Projections
To remove the speaker grilles
The speaker grilles are removed as the illustration below.
EN01-12_NX-CDR7[J_C]_4 01.9.14, 3:41 PM10