Filter
Top Products
Masterpage:Right-No-Heading
EN
87
Filename [XVS44U_11Trouble.fm]
Page 87 25 August 2003 11:00 am
JPEG Playback (DVD deck)
RECORDING (VCR deck)
2. Not MP3/WMA files but JPEG files are
played.
●
The MP3&WMA/JPEG setting is set to
“JPEG”.
When both MP3/WMA files and JPEG files
are recorded to a disc, set “MP3&WMA/
JPEG” to “MP3&WMA” to play MP3/WMA
files. (
੬
pg. 81)
3. The MP3/WMA control display
appears on the TV screen, but no
operation can be performed.
●
No MP3/WMA files or JPEG files are
recorded to the disc, or the disc is an
unplayable disc (such as CD-ROM).
Replace the disc. (
੬
pg. 9)
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. A disc cannot be played.
●
No JPEG files are recorded to the disc. Replace the disc.
●
JPEG files do not have the correct file
extension in their file names.
Add correct file extension (.jpg, .jpeg,
.JPG, .JPEG or any uppercase and
lowercase combination such as “.Jpg”) to
their file names.
●
JPEG files are not recorded in a format
compliant with ISO 9660 Level 1 or 2.
Replace the disc. (Record JPEG files using
a compliant application.)
2. Not JPEG files but MP3/WMA files are
played back.
●
The MP3&WMA/JPEG setting is set to
“MP3&WMA”.
When both MP3/WMA files and JPEG files
are recorded to a disc, set “MP3&WMA/
JPEG” to “JPEG” to play JPEG files.
(
੬
pg. 81)
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. Recording cannot be started.
●
There is no cassette loaded, or the
cassette loaded has had its record safety
tab removed.
Insert a cassette, or using adhesive tape,
cover the hole where the tab was
removed.
2. TV broadcasts cannot be recorded.
●
“F-1” or “L-1” has been selected as the
input mode.
Set to the desired channel.
3. Tape-to-tape editing is not possible.
●
The source (another video recorder,
camcorder) has not been properly
connected.
Confirm that the source is properly
connected.
●
All necessary power switches have not
been turned on.
Confirm that all units’ power switches are
turned on.
●
The input mode is not correct. Set the input mode to “F-1” or “L-1”.
4. Camcorder recording is not possible.
●
The camcorder has not been properly
connected.
Confirm that the camcorder is properly
connected.
●
The input mode is not correct. Set the input mode to “F-1” or “L-1”.
5. “
⅜
” and “
$
” on the front display
panel won’t stop blinking.
●
The end of the tape was reached during
recording.
The program may not have been recorded
in its entirety. Next time make sure you
have enough time on the tape to record
the entire program.
XVS44U_01.book Page 87 Monday, August 25, 2003 11:08 AM