Filter
Top Products
Masterpage:Right-No-Heading
EN
25
Filename [XVS44U_06Index.fm]
Page 25 25 August 2003 10:46 am
Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually. First follow steps
A
to
E
in
“Preparations” (
੬
pg. 24), then go to the following steps.
NOTE:
The time set previously will be erased when “AUTO CLOCK”,
“HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.
A
Set “AUTO CLOCK” to “ON”.
B
Select the host channel.
You can either select “AUTO” or enter a PBS channel
number.
Press
OK
or
e
to move the highlight bar to “HOST CH”,
then press
rt
repeatedly until “AUTO” or the desired
PBS channel number is selected.
NOTE:
Some PBS channels do not transmit clock setting data.
C
Select the D.S.T. mode.
Press
OK
or
e
to move the highlight bar to “D.S.T.”, then
press
rt
repeatedly until the desired setting is selected.
AUTO
: Select if you want to adjust your VCR’s clock
automatically by the incoming signal from the
host channel. Be sure to select the correct time
zone manually in step
D
.
ON
: Adjustment will be made by the built-in clock
itself.
OFF
: Select when Daylight Saving Time does not apply
to you.
D
Select the time zone.
Press
OK
or
e
to move the highlight bar to “TIME
ZONE”, then press
rt
repeatedly until “AUTO” or the
desired time zone is selected. Each time you press the
button, the time zone changes as follows:
{
AUTO
{
ATLANTIC
{
EASTERN
{
CENTRAL
{
MOUNTAIN
{
PACIFIC
{
ALASKA
{
HAWAII
{
(back to the beginning)
NOTE:
If an incorrect time is displayed by the Plug & Play function, you
may be receiving the clock setting data of a PBS channel from an
adjacent time zone or from an incorrect PBS channel from a
cable TV system. If you selected “AUTO” for the host channel in
step
B
, be sure to select the correct time zone manually.
E
Complete the Semiauto Clock Set.
Press
SET UP MENU
to return to normal screen.
Manual Clock Set
First follow steps
A
to
E
in “Preparations” (
੬
pg. 24), then go
to the following steps.
A
Set time, date and year.
B
Select D.S.T. mode.
C
Start clock.
Press
SET UP MENU
and normal screen appears.
To make corrections any time during the process
Press
OK
or
e
repeatedly until the item you want to change
blinks, then press
rt
.
Press
OK
or
e
repeatedly to
move the highlight bar to
“AUTO CLOCK”, then press
rt
so that “ON” is selected.
IMPORTANT
Turn off the unit after performing Semiauto Clock. “AUTO”
will appear on the front display panel while the clock is
being set. The current clock time will appear automatically
when the clock setting is complete.
AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the unit’s
clock at the start and end of Daylight Saving Time.
With Auto DST activated, —
— on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
— on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
Press
rt
until the desired
time appears, then press
OK
or
e
. Set the date and year in
the same way.
●
Holding
rt
changes the time
in 30-minute intervals, or
changes the date in 15-day
intervals.
Press
OK
or
e
to move the
highlight bar to “D.S.T.”, then
press
rt
to select the
desired setting.
ON
: Adjustment will be
made by the built-in
clock itself.
OFF
: Select when Daylight
Saving Time does not
apply to you.
XVS44U_01.book Page 25 Monday, August 25, 2003 11:08 AM