Filter
Top Products
Filename [XVS44U_07S-VHS.fm]
Masterpage:Left+
32
EN
Page 32 25 August 2003 11:07 am
OPERATIONS ON VCR DECK (cont.)
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
●
The unit’s power comes on automatically and the counter is
reset to 0:00:00.
B
Select the VCR deck.
On the unit
Press
VCR/DVD
repeatedly so that the VCR indicator
lights up.
On the Remote
Press
VCR
so that the VCR indicator lights up.
C
Choose a program.
Press
CH +/–
or the
number keys
to select the channel
you wish to record.
D
Set the tape speed.
Press
SP
/
EP
. The current setting appears on the front
display panel or TV screen. Press
SP
/
EP
again to change
the setting while the tape speed is displayed on the TV
screen.
E
Start recording.
Press and hold
REC
(
7
) and press
PLAY
(
4
) on the
Remote, or press
REC
(
7
) on the unit.
F
Pause/Resume recording.
Press
PAUSE
(
9
). Press
PLAY
(
4
) to resume recording.
●
You can select channel during the Record Pause mode.
G
Stop recording.
Press
STOP
(
8
). Then press
EJECT
(
x
) on the VCR deck
to remove the cassette.
●
Turn on the TV and select the VCR channel (or AV
mode).
●
Slide the
TV/VCR/DVD
switch to the right.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording (
੬
pg. 32, 33, 36), the
recording will resume automatically when power is restored
to the unit unless the unit’s memory backup has expired.
Video Calibration takes place at the beginning of both the
first SP and the first EP recording after inserting the cassette.
(
੬
pg. 35)
XVS44U_01.book Page 32 Monday, August 25, 2003 11:08 AM