JVC HR-XVS44U MP3 Player User Manual


 
Masterpage:Right-No-Heading
EN
31
Filename [XVS44U_07S-VHS.fm]
Page 31 25 August 2003 11:07 am
Next Function Memory
The Next Function Memory tells the unit what to do after
rewinding. Before continuing, make sure the unit is in the Stop
mode.
a-
For Automatic Start Of Playback
Press
REW
(
3
), then press
PLAY
(
4
) within
2 seconds.
b-
For Automatic Power Off
Press
REW
(
3
), then press
POWER
(
1
) within
2 seconds.
c-
For Automatic Timer Standby
Press
REW
(
3
), then press
TIMER
within 2 seconds.
d-
For Automatic Cassette Ejection After Tape Rewind
Press
REW
(
3
), then press
EJECT
(
x
) within 2
seconds.
Repeat Playback
Your unit can automatically play back the whole tape 100 times
repeatedly.
1
Start playback.
Press
PLAY
(
4
).
2
Activate Repeat Playback.
Press
PLAY
(
4
) and hold for over 5 seconds, then release.
The Play indicator (
$
) on the front display panel blinks slowly.
After playing back a tape 100 times, the unit stops
automatically.
3
Stop Repeat Playback.
Press
STOP
(
8
) at any time.
Pressing
PLAY
(
4
),
REW
(
3
),
FF
(
5
) or
PAUSE
(
9
) also
stops Repeat Playback.
Manual Tracking
Your unit is equipped with automatic tracking control. During
playback, you can override this and adjust the tracking manually
by pressing the
CH
buttons.
1
Override automatic tracking.
During playback, press
SP
/
EP
on the Remote.
2
Adjust the tracking manually.
Press
CH +
or
on the Remote.
Press
SP
/
EP
again to return to automatic tracking.
NOTE:
When a new tape is inserted, the unit enters the automatic
tracking mode automatically.
Soundtrack Selection
Your unit is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing
A.MONITOR
changes the soundtrack as follows:
You can also select the soundtrack on the Function Set screen.
(
pg. 75)
NOTES:
HIFI should normally be selected. In this mode, Hi-Fi stereo
tapes are played back in stereo, and the normal audio track is
played back automatically for tapes with only normal audio.
SUPERIMPOSE must be set to ON or the on-screen
displays will not appear. (
pg. 77)
TRACK
USE
On-Screen Display
H I-F I Hi-Fi sound is played back
H I-F I L
Sound on the left Hi-Fi channel is
played back
H I-F I R
Sound on the right Hi-Fi channel is
played back
NORM
Sound on the normal track is played
back
NORM
H I-F I
Both sounds on the Hi-Fi track and
normal track are mixed and played
back
XVS44U_01.book Page 31 Monday, August 25, 2003 11:08 AM