Filter
Top Products
EN 57
NOTE:
If you use an auxiliary input to connect a cable box or DBS
receiver, make sure that the correct AUX INPUT ("VIDEO" or
"S-VIDEO") is selected after you have finished editing
(
੬
steps 5 – 9, page 55).
SET RECORDER’S INPUT
MODE
4
Set to "AUX". With this VCR, press the NUMBER key "0"
and/or CH to select depending on the connector being
used – "L-1" for the rear AUDIO/VIDEO IN connector,
or "F-1" for the front AUDIO/VIDEO IN connector.
NOTE:
If you use your VCR as the recorder and have connected
another VCR to your VCR's S-VIDEO IN connector, you
need to set "REAR AUX INPUT" to "S-VIDEO" at the
Mode Set screen. Follow steps 5, 8 and 9 from the "Edit
From A Camcorder" section (
੬
pg. 55).
SELECT “EDIT” FOR PIC-
TURE CONTROL SET MODE
(VHS DECK ONLY)
5
Follow the “Picture Control” section on page 29, then
select “EDIT.”
NOTE:
When you select “EDIT” to dub tapes, be sure to select
“AUTO” or (“NORM” when “VIDEO CALIBRATION” is
set to “OFF”) after you finish dubbing the tapes.
START PLAYER
6
Set to its play mode.
NOTE:
If the player is equipped with a superimpose/OSD
disable feature then set "SUPERIMPOSE" to "OFF"
before pressing PLAY (
੬
pg. 27).
START RECORDER
7
Set to its record mode.
123
456
7
89
0
2
4
1
3
T W
DV S-VHS
NUMBER "0"
CH
OUTPUT1 Setting
Set "OUTPUT1" to the appropriate mode depending on the selection of the playing deck (VHS or DV) for editing.
Press MENU to access the Main Menu screen.
Press CH +/– or %fi to move the highlight bar (arrow) to "MODE SET", then press OK or
#
.
Press CH +/– or %fi to move the highlight bar (arrow) to "OUTPUT1".
Press OK or
#
to select "AUTO", "VHS" or "DV".
a–AUTO : The VCR outputs the signals from the deck being used automatically. The
superimposed indication is also output.
b–VHS : The VCR outputs only the signals from the VHS deck. The superimposed
indication is not output.
c–DV : The VCR outputs only the signals from the DV deck. The superimposed
indication is not output.
Press MENU to return to normal screen.
MENU
OK
MODE SET
REAR AUX INPUT VIDEO
= OUTPUT1 AUTO
2ND AUDIO RECORD OFF
AUTO TIMER OFF
SUPERIMPOSE ON
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END