JVC HR-DVS2U MP3 Player User Manual


 
EN 51
You can dub selected scenes on a tape, starting and stopping
wherever you wish.
LOAD CASSETTES
1
Insert a VHS (or S-VHS) cassette and a Mini DV
cassette.
SELECT DUBBING
DIRECTION
2
Press when you want playback on the DV deck and
recording on the VHS deck. The dubbing direction
(DV ) indicator lights.
OR
Press when you want playback on the VHS deck and
recording on the DV deck. The dubbing direction
( S-VHS) indicator lights.
SET TAPE SPEED
3
Press S-VHS or DV for the recording deck, then press
SP/EP (SP/LP for the DV deck).
LOCATE START POINT
4
For the playing deck:
Press S-VHS or DV to selsct the playing deck.
Press PLAY to start playback of the tape in the playing
deck, and press PAUSE to pause playback when you
find the point where you want to start dubbing.
For the recording deck:
Press S-VHS or DV to select the recording deck. Press
and hold PAUSE and press REC so that the recording
deck enters the Record-Pause mode.
START DUBBING
5
Press START.
Dubbing from DV to VHS:
DV play indicator (#) and VHS record indicator ( )
light.
Dubbing from VHS to DV:
VHS play indicator (#) and DV record indicator ( )
light.
PAUSE DUBBING
6
Press START.
END DUBBING
7
Press STOP. Then press S-VHS or DV to select the
playing deck and press STOP.
Normal
Dubbing
NOTES:
There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.
The superimposed indication during the operation or dubbing
is not recorded.
When dubbing from the VHS deck to the DV deck, also set
"SOUND MODE" to the appropriate mode (
pg. 33).
When dubbing from the DV deck to the VHS deck:
When dubbing a Mini DV tape that was produced by audio
dubbing, you need to set "12BIT MODE" to the appropriate
mode before playing the tape (
pg. 33).
To cancel the dubbing mode, press CH +/ so that the
dubbing direction indicator (DV
or
S-VHS) goes off.
123
456
7
89
0
2
4
1
3
T W
DV S-VHS
S-VHS
DUB
DV
PAUSE
REC
STOP
PLAY
S-VHS
DV
STOP
REC
PLAY
PAUSE
START
SP/EP
START