Filter
Top Products
EN 39
Super VHS ET (VHS deck only)
Your VCR is equipped with Super VHS ET that makes it possible
to record with S-VHS picture quality on VHS cassettes.
NOTES:
●
You cannot activate the S-VHS ET function...
...while recording is in progress.
...while timer-recording (incl. Instant Timer Recording
੬
pg. 49) is in progress.
...while Video Calibration (
੬
pg. 34) is in progress.
...when the VCR's power is off.
●
S-VHS ET does not work with S-VHS tapes.
S-VHS ET
This facility allows recording with S-VHS picture quality on
VHS cassettes. You can play back those cassettes recorded
in S-VHS ET on a VCR equipped with S-VHS ET.
NOTES:
●
To obtain the highest quality recording and playback
pictures over a longer period on this model, S-VHS
recording on S-VHS tape is recommended.
●
You can play back S-VHS ET recordings not only on this
VCR but also on another VHS VCR equipped with S-VHS
ET.
* It is recommended to specifically label S-VHS ET
recordings so you can easily distinguish them from
regular VHS recordings.
●
S-VHS ET recordings can also be played back on an S-
VHS VCR or a VHS VCR equipped with SQPB (S-VHS
QUASI PLAYBACK) function. However, there may be
cases where S-VHS ET playback is not possible on a
particular VCR.
●
Frequent still, frame-by-frame and slow-motion playback
may damage the tape and cause picture degradation.
●
With some tapes, better picture quality may not be
obtained even with S-VHS ET recording. It is recom-
mended that you do test record beforehand to make sure
whether better results can be obtained.
●
High Grade tapes are recommended for superior results.
●
Make sure that "VIDEO CALIBRATION" is set to "ON" at
the Function screen (
੬
pg. 34).
●
During S-VHS ET playback, noise may appear depending
on tape quality.
●
Noise may appear during still, frame-by-frame and slow-
motion playback.
●
If the playback picture becomes blurred or interrupted,
use a cleaning cassette.
ENGAGE S-VHS ET MODE
1
Press S-VHS ET on the VCR. You can check the current
setting ("S-VHS ET : ON" or "S-VHS ET : OFF") if
"SUPERIMPOSE" is set to "ON" (੬ pg. 27). If "S-VHS ET
: OFF" appears on the TV screen, press S-VHS ET again
in about 5 seconds to set it to "ON".
● The S-VHS indicator lights up on the front display
panel.