Filter
Top Products
EN 55
NOTE:
If you use an auxiliary input to connect a cable box or DBS
receiver, make sure that the correct AUX INPUT ("VIDEO" or
"S-VIDEO") is selected after you have finished editing
(
੬
steps 5 – 9).
0
4
1
3
DV S-VHS
NUMBER "0"
SET RECORDER’S INPUT MODE
4
Set to "AUX". Press the NUMBER key “0” and/or CH to
select depending on the connector being used – "L-1"
for the rear panel input connectors, or "F-1" for the front
panel input connectors.
ACCESS MAIN MENU SCREEN
5
Press MENU.
● If you use the front S-VIDEO IN or VIDEO IN
connector, perform step 6 – 7, then go to step 10.
● If you use the rear S-VIDEO IN or VIDEO IN
connector, go to step 8.
ACCESS VHS MODE SET SCREEN
6
Move the highlight bar (arrow) to "VHS MODE SET" by
pressing %fi, then press OK or
#
.
SELECT FRONT AUX INPUT SET
MODE
7
a– FRONT S-VIDEO IN :
Move the highlight bar
(arrow) to "FRONT
AUX INPUT" by
pressing %fi, then
press OK or
#
to set to
"S-VIDEO".
b– FRONT VIDEO IN:
Move the highlight bar
(arrow) to "FRONT AUX INPUT" by pressing %fi,
then press OK or
#
to set to "VIDEO".
MENU
OK
DV
DV
ACCESS MODE SET SCREEN
8
Press %fi to move the highlight bar (arrow) to “MODE
SET”, then press OK or
#
SELECT REAR AUX INPUT SET
MODE
9
a– REAR S-VIDEO IN:
Move the highlight bar
(arrow) to "REAR AUX
INPUT" by pressing
%fi, then press OK or
#
to set to "S-VIDEO".
b– REAR VIDEO IN: Move
the highlight bar
(arrow) to "REAR AUX
INPUT" by pressing %fi, then press OK or
#
to set to
"VIDEO".
SELECT “EDIT” FOR PICTURE
CONTROL SET MODE
(VHS DECK ONLY)
10
Follow the “Picture Control” section on page 29, then
select “EDIT.”
NOTE:
When you select “EDIT” to dub tapes, be sure to select
“AUTO” or (“NORM” when “VIDEO CALIBRATION” is
set to “OFF”) after you finish dubbing the tapes.
RETURN TO NORMAL SCREEN
11
Press MENU.
START PLAYER
12
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
13
Set your VCR to its record mode.
● If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
VHS MODE SET
S-VHS MODE ON
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
= FRONT AUX INPUT VIDEO
AUTO SP=LP TIMER OFF
BLUE BACK ON
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
MODE SET
=REAR AUX INPUT VIDEO
OUTPUT1 AUTO
2ND AUDIO RECORD OFF
AUTO TIMER OFF
=SUPERIMPOSE ON
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
S-VHS
S-VHS