Filter
Top Products
50 EN
Because this VCR includes both a VHS deck and a DV deck,
you can easily use it for dubbing without connecting any other
equipment.
LOAD CASSETTES
1
Insert a VHS (or S-VHS) cassette and a Mini DV
cassette.
SELECT DUBBING
DIRECTION
2
Press → when you want playback on the DV deck and
recording on the VHS deck. The dubbing direction
(DV →) indicator lights.
OR
Press ← when you want playback on the VHS deck and
recording on the DV deck. The dubbing direction
(← S-VHS) indicator lights.
SET TAPE SPEED
3
Press S-VHS or DV for the recording deck, then press
SP/EP (SP/LP for the DV deck).
START DUBBING
4
Press DUB for two seconds.
Dubbing from DV to VHS:
DV play indicator (#) and VHS record indicator ( )
light.
Dubbing from VHS to DV:
VHS play indicator (#) and DV record indicator ( )
light.
●
If the tapes have not been rewound, both decks
rewind automatically. The recording deck goes into
Record-Pause mode, and the playback deck goes into
Pause mode.
When both decks have finished rewinding, dubbing
begins automatically.
After dubbing is completed, the decks rewind both
tapes automatically and eject them. The VCR then
shuts off.
NOTES:
●
If you set the dubbing direction incorrectly, you could erase
an important recording that you wanted to copy. We
recommend conducting a test with unimportant cassettes first.
●
On the cassette that you are playing (i.e., recording from) we
recommend either setting the erase protection switch to
"SAVE" (if the cassette is a Mini DV cassette), or breaking off
the record safety tab (if the cassette is a VHS cassette).
●
If you start dubbing a tape from a tape with a copy protection
signal, the tapes will be automatically ejected from the DV
and VHS deck, and the VCR will turn off.
●
To cancel the dubbing mode, press CH +/– so that the
dubbing direction indicator (DV
→
or
←
S-VHS) goes off.
Tape Dubbing
Dubbing An Entire Cassette
123
456
7
89
0
2
4
1
3
T W
DV S-VHS
S-VHS
DV
SP/EP
S-VHS
DUB
DV
EDITING