Filter
Top Products
Filename [DR-MV1SUJ_09Editing.fm]
Masterpage:Left+
64 EN
Page 64 June 10, 2004 9:47 am
EDITING
Dubbing An Entire Disc
Because this unit includes both DVD deck and VCR deck, you can
easily use this unit for dubbing without connecting any other
equipment.
1 For DVD deck
Load a disc you want to dub.
For VCR deck
Load a cassette with the record safety tab intact.
2 Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3 Press REC MODE repeatedly to set the recording mode.
4 Press }DVD to select the dubbing direction.
● “}DVD” lights up on the unit.
5 Press and hold DUBBING for more than 2 seconds to start the
dubbing.
● If the tape has not been rewound, the VCR deck rewinds the tape
automatically. When the VCR deck has finished rewinding, dubbing
begins automatically.
● After dubbing is completed, the VCR deck rewinds the tape
automatically and the unit shuts off.
● To stop dubbing, press 8.
NOTES:
● It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
● There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually stars.
● The superimposed indication during the operation or dubbing is not
recorded.
● When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
● When the progressive mode is set, “}DVD” does not light up on the
front display panel. Press PROGRESSIVE SCAN so that video
output indicator ( ) lights off on the front display panel.
● It may be impossible to dub a DVD-R or DVD-RW (Video mode) disc
recorded on the devices from other manufacturers or on a PC. In
such case, perform “Manual Dubbing (From DVD To VCR)”
(੬ pg. 65).
● It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
● If “VCR]” lights up on the unit and you play back a DVD VIDEO disc,
the images dubbed to the VCR deck may not be output to the TV
properly.
Disc Dubbing (From DVD To VCR)
● Turn on the unit.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.
1
4
7
2
5
8
0
3
6
9
REC MODE
PROGRESSIVE SCAN
8
VCR/DVD
F-1
8
} DVD
DUBBING
VCR/DVD
DR-MV1SUJ_00.book Page 64 Thursday, June 10, 2004 9:48 AM