Filter
Top Products
- 18 -
CLOCK SETTING (Continued)
Setting the Alarm (s)
i. This Radio allows you to set two different wake-up times which can be used independently or
simultaneously AL1 or AL2 or AL1 and AL2.
ii. The procedure for setting the alarm time for ALARM 1 and ALARM 2 are the same.
iii. The following procedure describes how to set ALARM 1 alarm time:
1. In POWER off mode, press the ALARM 1 Button briefly. The ALARM 1 Alarm Indicator appears.
2. Press and hold the ALARM 1 Button until the wakeup sound source appears and flashes in the
display.
3. Press the or Buttons repeatedly to select the Alarm1 wakeup mode (HD Radio FM, HD Radio
AM, iPod or Buzzer).
4. Press the ALARM1 Button to confirm when the desired wakeup mode appears in the Display. The
Display will then show the flashing Hour digits prompting for input.
5. Press the or Buttons to select the desired wakeup Hour.
Note: Make sure the hour is set so that AM or PM is correctly displayed. It is important that the "AM" or
"PM" setting is correct for proper operation of the Alarm function.
6. Press the ALARM 1 Button again to confirm the wakeup Hour. Minute digits will appear and flash in
the Display.
7. Press the or Buttons to select the desired Minutes.
8. Press the ALARM 1 Button again to confirm the Minutes. The Alarm sound level will then be displayed
and flash to prompt for input.
9. Press the VOLUME + or – Buttons to select the desired wakeup sound level.
10.Press the ALARM 1 Button to confirm and the alarm setting process is then completed.
HDRadio AM
HDRadioFM
iPod Buzzer
CLOCK LIGHT OPERATION
1. For a bright LCD Display under normal room illumination, press the SNOOZE/LIGHT Button once.
The LCD backlight will turn on.
2. For a dim LCD Display in the dark press the SNOOZE/LIGHT Button again to turn the LCD backlight
off.
JENSEN JIMS-525i_Eng ib_Rev.p65 5/15/2008, 5:51 PM18