Filter
Top Products
19
2A. Slide the pole-mount bracket up onto the drop tube, aligning the pinholes
on the bracket with those on the drop tube.
(FOR SMALLER-DIAMETER DROP TUBES)
2B. When using a smaller drop tube, use the pole bushing when running the
wiring down through pole-mount-bracket cap. This will help to eliminate
pole wobble.
3. Slide the clevis pin through the aligned holes in the pole-mount bracket and
drop tube. Secure the clevis pin by inserting the cotter pin through the hole
in the clevis pin.
4. The pole-mount bracket can now hold the weight of the speakers.
Clevis Pin
Pole-Mount-BracketCap
DropTube
Pole-Mount Bracket
Pole-Mount-BracketCap
DropTube
Pole-Mount Bracket
Clevis Pin
Cotter Pin
Pole Bushing
Pole-MountBracketCap
DropTube
Pole-Mount Bracket
Pinholes
JBLP2605_CN_CNAW_PM-OM 4/23/08 12:57 PM Page 19