Filter
Top Products
EVOi.net
7
INSTALLATIONS/SETUP
STARTING UP
Installation Notes
Although installing an EVOi.net is straightforward, please
review the following notes to achieve the best installation:
• Choose a mounting location that provides direct front
panel viewing and easy access to the controls.
• The EVOi.net does not have a power on/off switch and
therefore is “ON” whenever AC power is activated. If
desired, use switched power outlets for master system
control.
• We strongly recommend the use of high-quality,
shielded audio cables for connection to the mixer and
EVO loudspeakers.
Connecting The System
Use Figure 4 (below) as an aid for interconnecting
EVOi.net to up to four EVOi.324 loudspeakers and your
mixer.
For help with loudspeaker placement, refer to EVOi.324 –
Applications on page 7 of the
EVOi.324 Users Guide.
Using Mono Sum
If your application calls for mono sound, simply press
MONO SUM on the rear of the EVOi.net. This will sum
the pair of outputs. (See EVOi.net – Features 15 and 16 on
page 6).
NOTE: Activating MONO SUM will lower the output level
by 4 dB.
Input
EVOi.324
Rear
OR
Output on
Generic Mixer
EVOi.net
Rear
EVOi.sys
Rear
XLR Signal Cable
Figure 4 - Basic System Connections