Insignia NS-MDDVD10 Portable DVD Player User Manual


 
13
Insignia NS-MDDVD10 Dual-Screen Portable DVD Player
www.insignia-products.com
Parents can control viewing privileges by using
the parental lock, which is set up with levels for
appropriate viewing. Control of viewing may vary
from disc to disc. For example, if the disc allows,
you could lock out violent scenes unsuitable for
children or you could lock out playback of the
disc altogether.
To set a rating:
1 Press the Setup button in stop mode.
2 Press the right or left cursor button to select
Rating, then press the Enter button.
3 Press the up or down cursor button to select
Parental Lock, then press the Enter button
repeatedly until you see the lock level/rating
setting desired.
The parental lock levels are equivalent to the
following ratings:
Note:
You cannot play DVDs rated higher than the level you
selected unless you cancel the parental lock function.
An icon on the screen indicates whether the
lock is active:
4 Press the up or down cursor button to select
Password. Enter your 4-digit security code
and then press the Enter button.
5 If you forget your password, you can erase
your current password by pressing the 8 on
the remote control four times, then pressing
the Enter button to confirm the setting
(Password: 8888). Reset your password as
instructed in step 4.
6 Press the up or down cursor button to select
Factory Set to return to factory settings.
Press the Enter button to toggle between
Yes and No. It takes 3 to 5 seconds to reset
the unit to the factory default.
7 To exit the Setup Menu and return to the
normal screen, press Return.
Loading a DVD or CD
1 Open the disc door by pressing and holding
the Open button.
2 Hold the disc by its sides and place it on the
central support with the printed side facing
towards you until you hear a click.
3 Close the disc door. It takes a short while for
your unit to load the disc. After loading, the
unit will automatically start playing most
DVDs.
4 If the DVD does not start automatically, press
the Play button.
Using the DVD player and monitor with
other equipment
To use a game system or external video
equipment with the DVD player:
1 Turn on the unit and slide the AV In/DVD
switch to AV In.
2 Turn on the video equipment and follow the
instructions provided with it to playback the
disc.
Note:
If you have a mono VCR, the volume level from the speakers
will be low.
To watch a DVD on your TV with the DVD
player:
1 Turn on the unit and slide the AV In/DVD
switch to DVD.
2 Turn on the TV and follow the instructions
provided with it to play the DVD.
To use other audio equipment with the DVD
player:
1 Turn on the unit and slide the AV In/DVD
switch to DVD.
2 Turn on your audio equipment and follow the
instructions included with it to select the
Audio In function.
Note:
You may experience interference if the radio tuner function
is selected while the television is working.
1: KID SAFE 5: PG-R
2: G 6: R
3: PG 7: NC-17
4: PG-13 8: ADULT
Indicates parental lock is not
active
Indicates the parental lock is
active
l
l
Open button