Filter
Top Products
16
Insignia NS-ES6112 CD Shelf System with iPod® Dock
www.insigniaproducts.com
Making connections
Connecting the AC adapter
Make sure that the AC power outlet matches the AC adapter’s power
specifications (100-240 V ~, 50/60 Hz) prior to plugging in the adapter.
To connect the AC adapter:
1 Complete all other connections.
2 Plug the small DC power connector into the DC IN jack on the back of
your shelf system.
3 Connect one end of the AC power cord to the adapter, then plug the
other end into an AC power outlet.
Connecting the speakers
Your shelf system comes with two (2) speaker cables with bare, soldered
wires at each end.
To connect the speakers:
1 Press the lever on the red (+) jack on the back of one speaker, then
insert one end of the red speaker cable into the jack.
2 Press the lever on one of the red (+) jacks on the back of your shelf
system, then insert the other end of the red speaker cable into the
jack.
3 Repeat Step 1 and Step 2 to connect the black speaker cable to the
black (–) jacks on the speaker and the back of your shelf system.
4 Repeat Steps 1 through 3 to connect the other speaker.
Connecting an iPod
®
Your shelf system came with six iPod® holders. Make sure that you select
the correct holder for the iPod® you are connecting. The holder number is
engraved on the front of the holder.
Note
Use only the AC adapter supplied with your sheld system, which
has the following specifications: DC 12 V 3.33 A
Unplug the adapter from the power outlet when not in use.
9
9
NS-ES6112_09-0398 ENG.fm Page 16 Tuesday, June 16, 2009 3:18 PM