Filter
Top Products
25
Insignia NS-2V17/NS-4V17 Sport MP3 Player
www.insignia-products.com
3 Open this file in any text editor.
Connecting to Bluetooth headphones
Your Insignia player supports stereo headsets for listening to your player. Your headset must support
Advanced Audio Distribution Profile (A2DP) and, optionally, Audio/Video Remote Control Profile (AVRCP),
which allows you to skip between tracks and adjust the volume.
Your player contains a Bluetooth radio which must be turned on to connect to your stereo Bluetooth
headphones. If you are not using the Bluetooth feature, you should turn off your Bluetooth radio to maximize
battery life when listening through the wired headphones.
Your headphones must be paired with your player. This is done by entering a PIN code (just like an ATM
machine) into your player. The pin code is contained in the instruction manual for your Bluetooth
headphones (many manufacturers use '0000'). Once paired, your headphones automatically connect with
your player if you have them turned on before turning on the player.
To connect your headphones to your player:
1 Turn on the Bluetooth radio.
2 Search for a headset.
3 Connect to the headset.
4 Pair with a headset using a PIN.
Turning Bluetooth on or off
To turn Bluetooth on or off:
1 Press (Menu). The main menu opens.
2 Select Settings, then press (Play/Pause).
3 Select Bluetooth, then press (Next) or (Play/Pause). The
Bluetooth
menu opens.
4 Select Enable, then press (Next) or (Play/Pause).
5 Select one of the following:
• Disable to turn off Bluetooth.
• Enable to turn off Bluetooth.
Note
If your Bluetooth headphones support AVRCP (Audio/Video Remote Control Profile), your headphones can control
Play/Pause, Skip Forward, Skip Backward, and Frequency Up/Down. The volume control on the headphones adjusts
the volume on your headphones, but does not adjust the volume on the player.
Note
Bluetooth headphones will not work when using line-in recording.