Insignia NS-2V17/NS-4V17 MP3 Player User Manual


 
17
Insignia NS-2V17/NS-4V17 Sport MP3 Player
www.insignia-products.com
To restart the current track, press (Skip Back/Rewind) once.
Rating songs
Using your player, you can rate songs you like and build improved playlists from your Music Manager
software, which can save the ratings into your library. BBDMS includes this feature, and it can build channels
which are optimized for your personal listening pleasure.
To use ratings:
To add a star to the current rating of a song on the screen, slide the rating button to the right.
To remove a star from the current rating of a song on the screen, slide the rating button to the left.
Repeating and shuffling playback
You can set the player to repeat or shuffle tracks using the Repeat/Shuffle menu.
To shuffle the playback order:
1 In the Settings menu, select Audio, then press
(Next) or (Play/Pause).
2 In the Audio menu, select Repeat/Shuffle Playback, then press
(Next) or (Play/Pause).
3 Use the scroll wheel to select the repeat mode, then press
(Next). The shuffle icon appears in the
Now
Playing
screen when you select a mode other than Off.
You can select from the following modes:
Repeat single track
Shuffle tracks/No repeat
Repeat all tracks
Repeat all tracks with shuffle
Repeating segments of a track
You can use A-B repeat to repeatedly play a segment of a track. You must first enable A-B repeat.
To enable A-B repeat:
1 Press
(Menu). The main menu opens.
2 Use the scroll wheel to highlight Settings, then press
(Next) or (Play/Pause).
3 Use the scroll wheel to highlight Audio, then press
(Next) or (Play/Pause).
4 Use the scroll wheel to highlight A-B repeat, then press
(Next) or (Play/Pause).
5 Use the scroll wheel to highlight On or Off, then press
(Next) to select. The message Use the down
button to activate A-B appears, then the Audio Setting menu opens again.
6 Press
(Menu) to return to the
Now Playing
screen.
To repeat an audio segment:
1 During playback, press
(Down) to mark the start of the playback loop. The Repeat icon on the display
shows an A.
2 Press (Down) again to mark the end of the playback loop. The Repeat icon on the display shows an
AB and the player repeats that audio segment indefinitely.
3 Press (Down) again to cancel the repeating loop.
Using the equalizer
Six equalizer settings are available, and five are preprogrammed: Normal, Rock, Jazz, Classic, and Pop. The
User setting lets you customize the equalizer to your preference.
To select a pre-programmed equalizer setting:
1 In the Settings menu, select Audio, then press
(Next) or (Play/Pause).
Tip
If you are using a subscription music service, your player will play a short tone between tracks when your content’s
subscription is about to expire. A message also appears on the screen telling you how many days are left before your
content expires.
Note
WMAlossless playback is only supported on the wired headphone output. Bluetooth is automatically turned off during
playback of WMAlossless.