Filter
Top Products
8
Installing Your JAM STATION
JAM STATIONJAM STATION
JAM STATION (Multimedia Memory Card
Reader):
(Desktop):
1. Shut down your computer and turn it’s power off.
2. Locate the FEMALE parallel / printer port in the back of the computer.
3. Plug the MALE 25-pin parallel port / printer port lead from the JAM STATION (Multimedia Memory Card
reader) into the computer…
4. If an existing MALE printer lead is plugged into the FEMALE parallel / printer port, unplug it.
5. Plug that existing MALE printer lead into the FEMALE parallel port / printer port attached to the cable for the
JAM STATION.
6. Locate the FEMALE PS/2 (keyboard or mouse) port in the back of the computer.
7. Unplug the MALE PS/2 (keyboard or mouse) lead from the computer.
8. Plug the MALE PS/2 (keyboard or mouse) lead from the JAM STATION into the FEMALE PS/2 (keyboard or
mouse) port in the back of the computer.
9. Locate the last FEMALE PS/2 (keyboard or mouse) port attached to the JAM STATION. Plug the MALE PS/2
(keyboard or mouse) lead into the FEMALE PS/2 (keyboard or mouse) port for the JAM STATION.
10. You are now ready to JAM!
(Laptop):
1. Shut down your computer and turn it’s power off.
2. Locate the FEMALE parallel / printer port in the back of the computer.
3. Plug the MALE 25-pin parallel port / printer port lead from the JAM STATION (Multimedia Memory Card
reader) into the computer…
4. If an existing MALE printer lead is plugged into the FEMALE parallel / printer port, unplug it.
5. Plug that existing MALE printer lead into the FEMALE parallel port / printer port attached to the cable for the
JAM STATION.
6. Locate the FEMALE PS/2 (keyboard or mouse) port in the back of the computer.
7. Plug the MALE PS/2 (keyboard or mouse) lead from the JAM STATION into the FEMALE PS/2 (keyboard or
mouse) port in the back of the computer.
8. You are now ready to JAM!