Filter
Top Products
RECORDING
40
Press VCR/TV button on the remote control to select TV so that the "VCR" appears on
the display
2 Select channel 3 or 4 on the TV
Turn on the TV and set the TV channel to the same video output channel as located on
the back of the VCR. (CH3 or 4)
IRT (Instant Recording Timer)
This function enables you to set a recording length simply by pressing the REC/IRT
button on the VCR.
NOTE: This function cannot be done by the remote control.
Make sure...
• VCR Power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel as located
on the back of the VCR. (CH3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on the display.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or
fast forward the tape to the point at which you want to begin recording.)
1 Select the channel to be recorded
Press number buttons on the remote control or the CH or button.
2 Begin IRT
Press REC/IRT button on the VCR as many times as needed. The recording length will
be determined by the number of times you press REC/IRT button.