Filter
Top Products
PLAYBACK
29
PLAYBACK
NORMAL PLAYBACK
Make sure...
• Turn on the TV and set the TV channel to the same video output channel as located
on the back of the VCR. (CH 3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on the display.
1 Insert a prerecorded tape
Counter mode appears at counter 0:00:00 on the TV screen. If the erase-protection tab
has been removed, the VCR will start playback automatically.
2 To begin playback
Press PLAY button.
If a tape is already in the VCR
2A) Using button on the VCR
Just press PLAY button on the VCR. Power will automatically turn on and playback will
start. (Direct Button Operation)
2B) Using button on the remote control
Press POWER button to turn on, and then press PLAY button on the remote control.
3 To stop playback
Press STOP button.
PICTURE SEARCH
This feature is useful in finding or skipping over a particular scene on a tape. In this
mode, the sound will be muted.
1) You may view a video tape at a high speed in either a forward or reverse direction by
pressing F.FWD or REW button. (in the SP/LP/SLP modes)
2) Depress it again, the VCR will now search in super high speed. (in the SP/LP/SLP
modes)
3) For normal speed, simply press PLAY button.
STILL PICTURE
You can view a still picture on the screen during playback (the Still mode). Press
PAUSE button during playback. "
" appears on the display. Press PLAY button to
return to playback.