Filter
Top Products
VCR Care and Servicing
55
Care and Servicing (cont.) pg. 52
If the VCR Doesn't Work Right
Many operational problems are easily remedied by reviewing the instructions in this manual and trying out
some different controls and settings.
The chart on the facing page covers the more common problems that new VCR owners encounter. You
can also consult the problem guide in your on-screen Easy Guide System. To bring up the screen, press
GUIDE twice, then press 7.
VCR WILL NOT RECORD
IS TAPE IN VCR
IS SAFETY TAB ON TAPE
IS TAPE REWOUND
IS PROGRAMMING CORRECT
IS VCR POWER TURNED OFF
AFTER PROGRAMMING
IS CLOCK SET CORRECTLY
*TO NEXT PRESS GUIDE
If none of these troubleshooting aids help you solve the problem, then see your Hitachi service center.
Don't Attempt Repairs Yourself
Do not remove the cover or the back of the VCR - this will void the warranty and endanger your safety.
The exposed uninsulated voltage in this unit may be high enough to cause electrical shock. It is
dangerous to make contact with any inside part, and none of these parts are intended to be serviced by
an untrained user. To be safe, refer service problems to qualified service personnel.