Filter
Top Products
Basic Operations
35
Basic Operations (Playback cont.) pg. 31
Press DISPLAY again and an "M" will display below the counter on the TV screen: This indicates that
the counter's memory function is engaged.
Now when you rewind the tape, it will automatically stop at the spot where you cleared the counter.
(Notice it moves just past the marker and then back to it.) Press PLAY to watch the tape from that
preselected spot.
Press DISPLAY to take the counter display off. The spot is still in memory until you set a new one or
until the tape is ejected.
Jump Forward or Backward with INDEX
Using the time counter, you can search for a spot a certain number of minutes before or after your current
position on the tape.
Press STOP, if tape is playing, and press INDEX to bring up the Set Go-To Time screen:
SET GO-TO TIME
TIME -:--
INDEX
PRESS F.FWD OR REWIND
TO START
SCAN AND PLAY
*TO END PRESS INDEX
Select minutes by pressing buttons 0 to 9 - one digit for hours, then two digits for minutes. Then press
F.FWD if you want to move that many minutes ahead, or REW if you want to move that many minutes
backward.
For example, say you want to review a scene that began about 2 minutes earlier in a video, press 0, 0
and 2 to display 0:02 on the screen. Then press REW.
The tape rewinds to the place 2 minutes back from where you began, then starts playback automatically
from that spot.