Filter
Top Products
Getting Started (Videotapes)
30
Getting Started (Videotapes cont.) pg. 26
Loading and Ejecting
When you load a videocassette into the VCR, there is only one right way! Most tapes show you the way
with a little arrow on the top side which should go in first.
Push the videocassette gently into the slot on the front of the VCR. You will feel the VCR take it in.
When the cassette is all the way in, the VCR powers up automatically and a TAPE-IN indicator shows on
the display. It may also start playing immediately if the safety tab has been removed and if you have set
the MOVIE RETURN function to ON.
To remove the cassette, simply press the STOP/EJECT button on the VCR. (If the tape is playing, press
STOP/EJECT once to stop the tape and a second time to eject it.)
Now you can take the cassette out and put it away.
Tape Storage
Store your videocassettes in their jackets and in an upright position (like books in a bookshelf) away from
any magnetic sources. Resist the temptation to leave them lying flat on top of the VCR. Tapes will last
longer - and so will your VCR - if you store them properly. Remember, dust, dirt and liquids are enemies
of your tapes and VCR.
To avoid aggravation later, apply the labels that come with new tapes. On them, write notes to yourself
about what you recorded.