Filter
Top Products
HP P2000 G3 SAS MSA System User Guide 19
Rear panel components
P2000 G3 SAS MSA System SFF and P2000 G3 SAS MSA System LFF
IMPORTANT: See Connecting to the controller CLI port for information on enabling the controller
enclosure’s USB Type B CLI port.
Drive enclosures attach to the controller enclosure for the purpose of expanding storage capacity. Drive
enclosures supported by the P2000 G3 MSA System controllers are described in the following sections.
The 3Gb drive enclosures supported by the newer controller enclosures are listed for customers upgrading
existing legacy systems.
NOTE: For optimal performance, 6Gb P2000 G3 MSA System controller enclosures should be cabled to
6Gb P2000 G3 MSA System drive enclosures when expanding storage capacity.
D2700 6Gb drive enclosure
P2000 G3 MSA System controllers support D2700 6Gb drive enclosures. For information about
P2000G3MSA System products, visit http://www.hp.com/go/p2000
. Select Related products, select
your drive enclosure, select Support > HP Support & Drivers from the right side of the page, select your
product name, and select Manuals.
1 AC Power supplies
2 Controller module A
3 Host interface ports (mini-SAS)
4 Reserved for future use
5 CLI port (USB - Type B)
6 USB - Type A port: reserved for future use
7 Network port
8 Service port (used by service personnel only)
9 SAS expansion port
10 Controller module B
11 DC Power supply (2) — (DC model only)
12 DC Power switch
SERVICE
CACHE
CLI CLI HOST
SERVICE
CACHE
CLI CLI HOST
6Gb/s
6Gb/s
SAS 1
LINK
ACT
LINK
ACT
SAS 2 SAS 3
LINK
ACT
LINK
ACT
SAS 4
SAS 1
LINK
ACT
LINK
ACT
SAS 2 SAS 3
LINK
ACT
LINK
ACT
SAS 4
ACT
LINK
ACT
LINK
135791
w
4 6 8
q
3
-
2