Filter
Top Products
ENGLISH
Getting Started Connections Setting Playback Information
Specifications
GNETH
Symptom Cause Countermeasure Page
Internet radio cannot be
played.
• Ethernet cable is not properly connected or network is
disconnected.
• Program is being broadcast in non-compatible format.
• The computer’s or router’s firewall is activated.
• Radio station is not currently broadcasting.
• IP address is wrong.
• Check the connection status.
• Only Internet radio programs in MP3 and WMA can be
played on this set.
• Check the computer’s or router’s firewall settings.
• Choose a radio station that is currently broadcasting.
• Check the set’s IP address.
7
21
–
–
–
Files stored on a
computer cannot be
played.
• Files are stored in a non-compatible format.
• You are attempting to play a file that is copyright
protected.
• Computer’s power is not turned on.
• Record in a compatible format.
• Files that are copyright protected cannot be played on this
set.
• Turn on the power.
21
21
–
Server is not found,
or it is not possible to
connect to the server.
• The computer’s or router’s firewall is activated.
• Computer’s power is not turned on.
• Server is not running.
• Set’s IP address is wrong.
• Check the computer’s or router’s firewall settings.
• Turn on the power.
• Launch the server.
• Check the set’s IP address.
–
–
–
–
Cannot connect to preset
or favorite radio stations.
• Radio station is not currently broadcasting.
• Radio station is not currently in service.
• The
RESET button was pressed.
• Firmware has been updated.
• Wait a while before trying again.
• It is not possible to connect to radio stations that are no
longer in service.
• When the
RESET button is pressed, the settings are
initialized and are restored to the default settings.
• When the firmware has been updated return to default
factory settings.
–
–
–
17
For some radio stations
cannot be connected to.
• Station is congested or not currently broadcasting. • Wait a while before trying again.
–
Sound is broken during
playback.
• Network’s signal transfer speed is slow or communications
lines or radio station is congested.
• This is not a malfunction. When playing broadcast data with
a high bit rate, the sound may be broken, depending on the
communications conditions.
–
Sound quality is poor or
played sound is noisy.
• File being played has a low bit rate.
• Equalizer settings are configured in the iPod.
• This is not a malfunction.
• Release the iPod equalizer settings.
–
–
Troubleshooting