Filter
Top Products
ENGLISH
Getting Started Connections Playback Information Troubleshooting Specifications
Making Detailed Settings (Setup)
For details on how to select, set and cancel settings for each menu, see “GUI
Menu Operation” (vpage 9, 10).
Setting items Setting contents
Network Setup
(Continued)
If you are using a
broadband router
(DHCP function),
there is no need to
make the settings
at “IP Address”
and “Proxy”, since
the DHCP function
is set to “ON” in
the ASD-51W’s
default settings.
If the ASD-51W
is being used
connected to a
network without
the DHCP function,
the network
settings must be
made. In this case,
some knowledge
of networks is
required. For
details, consult
a network
administrator.
•
•
Network Setup
Up/Down Back/Select
IP Address
DHCP
192.168.11.3
ON
Exit
Detail
Detail
Up/Down Back/Select
IP Address
DHCP
192.168.011.003
OFF
Subnet Mask 255.255.255.0.
Default Gateway 000.000.000.000
Primary DNS 000.000.000.000
000.000.000.000Secondary DNS
Proxy
q Select “Detail” and press ENTER.
w Use p to set “DHCP” to “OFF”, then press i.
The DHCP function is disabled.
e Use uio p to input the address and press ENTER.
IP Address : Set the IP address within the ranges
shown below. The Network Audio function cannot be
used if other IP addresses are set.
CLASS A : 10.0.0.0 ~ 10.255.255.255
CLASS B : 172.16.0.0 ~ 172.31.255.255
CLASS C : 192.168.0.0 ~ 192.168.255.255
Subnet Mask : When connecting an xDSL modem or
terminal adapter directly to the ASD-51W, input the
subnet mask indicated in the documentation supplied
by your provider. Normally input 255.255.255.0.
Default Gateway : When connected to a gateway
(router), input its IP address.
•
•
•
Make network settings.
Setting items Setting contents
Network Setup
Make settings for
wired or wireless
LAN.
Wired LAN settingsn
1. Connect the LAN cable (vpage 7).
2. Turn on the ASD-51W (vpage 4, 6 b1 ).
ASD-51W performs automatic network setup due to
the DHCP function.
When connecting to a network that has no DHCP
function, perform the setting in step 3.
3. Set the IP address at the GUI menu “Setup”
– “Network” – “Network Setup”.
Making Detailed Settings (Setup)
See overleaf
DHCP (Dynamic Host Configuration Protocol)
These are systems by which the IP address and other network settings are
automatically set for the ASD-51W, computer, broadband router and network
devices.
q
w
e
Making the Network Settings
(Network)
Default settings are underlined.
Items that can be set with the “Setup” proceduren
Making the GUI settings
(GUI) vpage 16
Making other settings
(Other) vpage 16
Making language settings
(Language) vpage 15
Making the network
settings (Network)
Wired LAN settings
v
page 11
Wireless LAN settings
Automatic settings
v
page 13
WPS settings
v
page 14
Manual settings
v
page 15
n
n
•
•
•
Setting