Filter
Top Products
18
3.3 The SETUP Menu
Chapter 3: Basic Setup
Before using the So Smart player, you may need to configure
the So Smart player to work with your Display (TV) and
Network Setup.
Press SETUP menu on the So Smart Remote to view the
setup options on the main panel. The main panel displays
options to configure settings for TV, Network, Wireless, Media
file playback settings and some Miscellaneous settings for the
So Smart Player.
To apply SETUP settings, select the option and press SETUP
on the So Smart Remote.
Use the navigation button on the So Smart Remote to select
the TV icon/option. This option allows you to configure your
video-out settings.
Use the right-arrow button on the So Smart Remote to
navigate to the main panel and select configuration option.
Press ENTER on each configuration to view available setup
options.
SPDIF out: DownMix and Passthrough
Audio Channel: 2 Channels and 5+1 Channels.
Video Out: S-Video, Component, DVI etc.
TV Standard: PAL versus NTSC (USA customers use NTSC)
TV Type: 4:3 versus 16:9 (If using Widescreen Display / TV use 16:9)
Use the left -arrow button on the So Smart Remote to navigate
back to the left-side column.
From the left-side navigation column, select NETWORK Setup.
Press ENTER / SELECT on the So Smart Remote.
Enable: Wired / Wireless (Choose Wired versus Wireless Network)
Address Setup: Auto vs Manual (Choose manual to enter IP Address,
Netmask and Gateway manually)
IP Address: (IP address is set automatically, if Address Setup is AUTO)
Netmask: Subnet Mask setup
Gateway: (If using Router, use IP address of the router)
MAC Address : Displays MAC address information (Wired / Wireless)
Wire Apply: Displays Wired Network Status: Success vs Fail
Wireless Apply: Apply Displays Wireless Network status: Success vs Fail
(If Wireless Apply is selected, the System automatically moves to next
screen… <see next page>)
( Select Wire Apply or Wireless Apply to apply settings or Press SETUP
on So Smart Remote to Apply these settings.)