Filter
Top Products
iAUDIO M3
20
iAUDIO M3
21
Line-in Recorder (Direct Encoding)
Simple Operations by Mode
Line-in Recorder (Direct Encoding)
1. Preparing Line-in Recording
• Turn on iAUDIO, press the MODE button and select LINE-IN Recorder.
• iAUDIO enters LINE-IN Recorder Mode and stays in Stand By status.
• Connect the headphone jack of CDP and the LINE-IN jack of iAUDIO with a bi-directional stereo jack
cable.
2. Line-in Recording Start/Pause/Stop
• Press the REC button in STAND BY status to start recording, and play CDP as soon as recording starts.
• Press the PLAY button to pause recording, and press it again to resume recording.
• Press the REC button again to nish recording. "Wait" message appears while the le is being saved, and
iAUDIO returns to STAND BY status when the saving nishes.
• The recorded le is saved as ENC***.MP3 in the RECORD folder according to the preset recording
quality (***: a 3-digit serial number).
• You cannot turn off iAUDIO, nor change Menu, Navigator and Mode while recording.
Select Line-in Recorder Mode. iAUDIO is in Stand By. Press REC button. Line-in Recording starts. Press REC button to nish recording.