iAUDIO M3
16
iAUDIO M3
17
Digital Audio Mode (Listening to music le)
1. Playback
• Press the PLAY button for a few moments. The iAUDIO logo appears and the power turns on.
• To enter Digital Audio Mode from other modes, enter the Mode Switching window by pressing the Mode
button, and then select "Digital Audio".
• If AutoPlay is set to "ON", play starts as soon as iAUDIO powers on. Otherwise, iAUDIO is on standby.
In the latter case, press the PLAY button to play music.
• If the Resume feature is set, iAUDIO plays from the last stopped position.
• iAUDIO pauses when you press the PLAY button briey during playback, and resumes when you press
it again.
• iAUDIO automatically powers off if the "AUTO OFF" or "SLEEP" setting is preset.
2. Adjusting Volume
• Press VOL+ or VOL button to adjust volume while iAUDIO is playing.
• The volume changes by 1 level when you press the button briey, and it changes rapidly when you press
and hold the button.
• The volume level can be adjusted between 0 (mute) and 40.
3. Block Repeat:
• Use the REC (A
B) button while a track is played in Digital Audio Mode.
• When you press the button at the beginning position of the desired block of music, (A
) icon is displayed
at the top middle of LCD window.
When you press the button again at the end of the desired block, the icon changes to (A
B).
• Now this block is played repeatedly in a loop.
• To release this block, press the REC button again.
• You can select only three seconds or longer repeat blocks.
4. Searching tracks in Playback window
■ Searching tracks in Play status
• You can skip to the next track by pressing the FF or REW button briey in Play status.
- Unlike memory-type players, a HDD type player should power on the HDD if it is turned off to read
tracks. Therefore, there can be a little delay before a track is played. In this case, the "WAIT" pop-up
window appears, and playback starts after 2 or 3 seconds.
- You can easily nd out the operation status of HDD from the HDD icon at the top of LCD window and
the HDD LED on the main body.
■ Searching tracks in STOP or PAUSE status
• You can skip to the next track by pressing the FF or REW button briey in STOP or PAUSE status as well.
• The next track stays in STOP status unlike the above case, where you skipped it in PLAY status.
• When you press and hold the FF or REW button, you can skip through consecutive tracks.
- Since HDD doesn’t have to be accessed in STOP status, previous and next tracks can be searched for
immediately.
5. What is Dynamic Play-List (DPL)?
• There is a special folder named "D-PLAYLIST " under the root folder (it is not displayed on HDD), in
which the links to user-selected tracks are saved.
• You can add or delete desired links or you can select the "D-PLAYLIST " folder and links in it from
Navigator to listen to selected DPL tracks only.
Simple Operations by Mode
Digital Audio Mode