Filter
Top Products
iAUDIO 4
44
iAUDIO 4
45
Connecting iAUDIO and Installing JetShell
Installing JetShell
When you insert the iAUDIO Installation CD in the CD-ROM drive, the installation program starts automatically.
It may not start automatically sometimes depending on the status of the Windows. In this case, run CD-ROM:
\Setup.exe or CD-ROM:\JetShell\Setup.exe.
When the installation nishes, Start → Programs → COWON → iAUDIO 4 program group is registered.
Connecting iAUDIO
Windows ME/2000/XP
1. Insert a new battery in iAUDIO correctly.
2. The H:\ drive shown in the illustration is an example, and it may be different from the actual drive name of your
PC. It was given for your reference only.
3. With the USB cable, connect the USB ports of iAUDIO and your PC. (iAUDIO should not use a USB hub. It
is assumed that you connect to the USB port on the main board.)
4. In the normal Windows environment, as soon as the cable or simple USB jack is connected, the message
"Searching for new device" appears and the USB driver for iAUDIO 4 is installed automatically. The drive
installation window may not appear on the screen depending on the status of Windows.