Filter
Top Products
128-6400
18 of 28
18
When the key tone features is on, the tone icon appears steady on the
display, and the beep tones sound in response to button activation.
Roger Beep Tone
The Roger Beep is a tone which is automatically transmitted whenever the
PTT button is released. This tone alerts the receiving party that the trans-
mission has been terminated intentionally.
To turn the Roger Beep tone on or off:
- From GMRS/FRS standby mode, press the FUNC Button nine times
until the rb and On or oF indications appear on the display, together
with a flashing RGB.
- Press the Up or Down Button to toggle the Roger Beep tone feature On
or oF.
- Press the PTT button to confirm selection.
When the Roger Beep tone features is on, the RGB indication appears
steady on the display.
Caller Identification (ID) Select
The caller ID function allows you to assign an ID code between 1 and 10,
accompanied by a unique call tone; this code and tone accompanies your
transmission whenever you call another party, and will appear at the
receiving unit, provided it has caller ID capability.
To select a caller ID code for your unit:
- From GMRS/FRS standby mode, press the FUNC button 10 times;
Id appears, together with oF or 1-10 and a flashing ID indication.
- Use the Up or Down button to select the desired call identification
number.
- As you step through the ID codes between 1 and 10, stop at the de-
sired code number.
- Press the PTT or Monitor button to confirm selection.
Now, your caller ID number will accompany each transmission, and will
appear on the receiving unit, if so equipped, and vice-versa.