Filter
Top Products
128-6400
12 of 28
12
Down Channel/Volume Button (11)
In the standby mode, pressing this button will decrease the volume. When
in function edit mode this button will be used to adjust the unit’s settings.
FUNCtion Button (10)
This button is used to select various feature settings in the GMRS and FRS
modes.
External Speaker (EAR)/Microphone (MIC) Jack (6)
This jack accepts the Audiovox Earset/Microphone assembly. Refer to Earset/
Microphone operation later in this manual.
Emergency (EMG)/LOCK Button (14)
This radio has a quick access button (EMG) to the Emergency and
Assistance Channel. This channel is NOT monitored by local authorities.
When using this channel, EMG appears on the display. Pressing this
button will set the transceiver to channel 20, operating on 462.6750 MHz. In
addition, when the EMG button is pressed and held, the auto keylock feature
is enabled; the keylock icon (
) appears on the display. Press and hold
the EMG button again, and the keylock icon will disappear.
Operating Modes and Features
GRMS/FRS Operation:
- From GMRS/FRS standby mode, press and hold the Power (P) button
for 2 seconds to turn on power.
- Press the FUNC button so the Channel number flashes.
- Select the desired channel with the Up (9) and Down (11) Buttons;
then press the PTT button to confirm selection (automatic confirma-
tion occurs 10 seconds later). When receiving a call, the Monitor icon
(
) and indication will appear on the display.
- Press and hold the PTT button (4) to transmit, then speak into the
microphone clearly and slowly. The Transmit icon (
) will appear
on the display; the number of bars will reflect the selected power
level.