Filter
Top Products
5
5
1
1
Ports, Buttons, and Connections
Ports, Buttons, and Connections
A Headphone Jack
B USB 2.0 port – To connect your ARCHOS device to a computer, to transfer fi les
and/or charge the battery.
C On button (hold 3 seconds) & Menu options
D Off button (hold 3 seconds) & Stop/Escape*
Navigation pad
E Move Up & increase volume
F Move Down & decrease volume
G Move Left (decrease value) or audio/video rewind
H Move Right (increase value) or audio/video fast forward
I Play/Pause/Resume/Enter
* Hardware reset: in the event that the ARCHOS 105 freezes operation, you can reset your device by holding down on the
STOP/ESC button for 15 seconds.
A
B
C
D
E
F
H
G
I
6
6
2
2
First Time Usage
First Time Usage
2.1 Charging the Battery
2.1 Charging the Battery
Before using your ARCHOS 105 for the fi rst time, completely charge the battery.
• The ARCHOS 105 is charged through its USB connector. Connect the included USB cable to a running
computer and plug the other end into the ARCHOS 105 while it is off. This will charge its internal battery.
• A lightning bolt symbol will fl ash over the battery icon in the status bar while the battery is charging:
.
• It will stop fl ashing when the battery is fully charged:
.
2.2 Turning the ARCHOS 105 ON and OFF
2.2 Turning the ARCHOS 105 ON and OFF
• Press and hold the ON/Menu button until the screen comes on.
• The ARCHOS 105 will automatically shut off after a given amount of time if no buttons are pressed. To conserve
battery energy, the backlight will automatically shut off. You can change these parameters in Setup > Power .
• Press and hold the Stop/off button until the ARCHOS 105 shuts off.
2.3 Changing the Interface language
2.3 Changing the Interface language
• English is selected as the default language for your ARCHOS 105 user interface. You can choose another
language by going to Setup > Display .