Filter
Top Products
32 Chapter 2 Music Features
Note: The volume of songs and other audio may vary depending on how the audio
was recorded or encoded. See “Setting Songs to Play at the Same Volume Level” on
page 32 for information about how to set a relative volume level in iTunes and on
iPod classic. Volume level may also vary if you use different earphones or headphones.
With the exception of the iPod Radio Remote, accessories that connect through the
iPod Dock Connector don’t support volume limits.
If you set a combination, you must enter it before you can change or remove the
maximum volume limit.
To change the maximum volume limit:
1 Choose Settings > Volume Limit.
2 If you set a combination, enter it by using the Click Wheel to select the numbers and
pressing the Center button to confirm them.
3 Use the Click Wheel to change the maximum volume limit.
4 Press the Play/Pause button to accept the change.
To remove the maximum volume limit:
1 If you’re currently listening to iPod classic, press Pause.
2 Choose Settings > Volume Limit.
3 If you set a combination, enter it by using the Click Wheel to select the numbers and
pressing the Center button to confirm them.
4 Use the Click Wheel to move the volume limit to the maximum level on the volume bar.
This removes any restriction on volume.
5 Press the Play/Pause button to accept the change.
Note: If you forget the combination, you can restore iPod classic. See “Updating and
Restoring iPod Software” on page 63 for more information.
Setting Songs to Play at the Same Volume Level
iTunes can automatically adjust the volume of songs, so they play at the same relative
volume level. You can set iPod classic to use the iTunes volume settings.
To set iTunes to play songs at the same sound level:
1 In iTunes, choose iTunes > Preferences if you’re using a Mac, or choose
Edit > Preferences if you’re using a Windows PC.
2 Click Playback and select Sound Check, and then click OK.
To set iPod classic to use the iTunes volume settings:
m Choose Settings and set Sound Check to On.
If you haven’t activated Sound Check in iTunes, setting it on iPod classic has no effect.