Filter
Top Products
42
43
Chapter 6: Advanced Tools
Steps to upgrade new rmware in the device via a USB drive
Step 1.
Copy the new rmware to the ROOT directory of a USB drive or a USB
MP3 player. (Note. Please DON’T modify the le name, otherwise the
AIRMM02F can’t nd the new F/W)
Step 2.
Power on the AIRMM02F and then plug-in the USB drive into the front
USB port of the AIRMM02F.
Step 3.
Operate the AIRMM02F to get into the F/W upgrade menu (“Setup\Ad-
vanced Setup\F/W Upgrade(thru. USB)”), then press the OK button to
activate the
F/W Upgrade function. You should see the following messages “F/W
Upgrading”, and “Don’t Power OFF!!”. After a few seconds, the device
will reboot automatically when the upgrade operation is completed.
Step 4.
You can verify the rmware upgrade is successful by checking the rm-
ware version from the menu “Setup\Advanced Setup\Firmware Version”.
Chapter 7: Misc.
7.1 Clock Setting
Prior to setting the alarm, you need to set the clock of AIRMM02F. First,
select the Setup function from the Main Menu.
The rst item “Clock” is for the date and time setting. Press OK or “ ”
button to set the clock value.
There are 3 items in the clock menu, the rst one will display the cur-
rent date and time; the second item is for you to set the date and time
manually or via auto-Sync (automatically synchronize with network time
server). If you select the “Auto-sync” function, the device will periodically
synchronize with the server. The third option lets you change time dis-
play format between 12-Hours or 24-Hours. There is a built-in battery in
the device, so if you power off the device, the clock will continue to run.