Zebra Technologies Z4Mplus Manual

A SERVICE OF

next previous

56 Z4Mplus and Z6Mplus User Guide

Printer Basics

Load the Ribbon

Remove the Ribbon

1. If the ribbon has not run out, break it between the strip plate and the ribbon take-up

spindle.

2. While turning the ribbon take-up spindle release knob counter clockwise, squeeze

the ribbon against the ribbon take-up spindle tension blades.

3. When the tension blades collapse into the ribbon take-up spindle, hold the release

knob and rotate the spent ribbon toward the rear of the printer. Then, slide off the

ribbon.

Note • Do not cut the ribbon on the ribbon take-up spindle. This may damage the

spindle.