Zebra Technologies 105SL Manual

A SERVICE OF

next previous

28 105SL User Guide 6/4/2004 11342L Rev. 8

Printer Operation

Removing the Label Liner

Removing the Label Liner

Because the rewind spindle holds the liner from a standard-size media roll, perform this

procedure whenever yo u change the media. You do not need to turn off the printer to perform

this procedure.

To remove the liner from the rewind spindle, follow these steps:

1. Unwind approximately 36 in. (915 mm) of liner from the rewin d sp indle. Cut it off at the

spindle.

2. Pull out the hook. Slide the lin er off of the rewind spindle and di scard.

3. Wind the media around the rewind spindle once or twice and reinstall the hook. Continue

winding to remove any slack in the media.