Advanced Features and Troubleshooting Manual 95
Control Panel Messages
Paper Jam
Clear Tray 5
■ Clear the paper jam in Tray 5 of the 2,500 Sheet Feeder (see the Paper Jams
section of the User Guide).
Please Wait An operation that takes time is proceeding.
■ Please wait until the operation finishes.
Power Saver On No print jobs have been received for the set period of time for the Power Saver,
so the printer has set itself to lower power mode.
■ As soon as it receives the next print job, the printer returns to regular power
mode.
Press Menu Appears when in the menu system and you selected the Password menu but
there are no secure or proof jobs in the job queue.
■ Press the Menu keys (labeled 1 or 5) to access another menu.
■ Press the On Line key (labeled 0) to exit the menu system.
Print Using
<size> <type>
The available paper size or type does not match what was requested and the
Value key (labeled 3 or 7) was pressed.
■ Use the Value keys to search the trays. When you find an available size and
type of paper that is acceptable, press the Enter key (labeled 4). Back out of
the menu to exit. If the paper size and type that was substituted is not
acceptable, load the requested paper size and type, and print the job again.
Processing...
<job name>
A job is being processed with the specified name.
Processing...
Config Sheet
A Configuration Sheet is being printed.
Processing...
DEMO
A Demo Page is being printed.
Processing...
Disk Directory
The Hard Drive directory report is being created.
Processing...
Envelope Feeder
The Envelope Feeder is being used.
Processing…
Fault History
The printer is generating and printing a fault history log.
Processing...
Flash Directory
The Flash Directory report is being created.
Processing...
MBF
The MBF is being used.
Processing...
Menu Map
A list of the control panel menu structure is being printed.
Processing...
PCL Font List
A PCL Font List is being printed.
Processing...
PostScript
A PostScript font list is being printed.
Processing...
TEST
A Test Page is being printed.
Processing...
Tray n
The specified tray is being used.
Error Description and corrective action
