96 FTM-10R OPERATING MANUAL
MENU
(
“SET”
)
MODE
Set Mode Item [
F24 RPT ARSF24 RPT ARS
F24 RPT ARSF24 RPT ARS
F24 RPT ARS]
Function: Enables/Disables the Automatic Repeater Shift function.
Available Values: ON/OFF
Default: ON
Set Mode Item [
F25 RPT MODEF25 RPT MODE
F25 RPT MODEF25 RPT MODE
F25 RPT MODE]
Function: Sets the Repeater Shift Direction.
Available Values: RPTR OFF/RPTR -/RPTR +
Default: Depends on the transceiver version, as well as the setting of Menu Item [F24
RPT ARS].
Set Mode Item [
F26 RPT SFTF26 RPT SFT
F26 RPT SFTF26 RPT SFT
F26 RPT SFT]
Function: Sets the magnitude of the repeater Shift.
Available Values: 0.00 - 99.95 MHz (50 kHz increments)
Default: Depends on the operating band and transceiver version.
Set Mode Item [
F27 RX EXPF27 RX EXP
F27 RX EXPF27 RX EXP
F27 RX EXP]
Function: Enables/Disables the band expansion.
Available Values: NORMAL/EXPAND
Default: NORMAL
When this Set Mode Item is set to “EXPAND”, you will receive the following additional
bands.
108 - 137 MHz 300 - 336 MHz 470 - 800 MHz
174 - 200 MHz 336 - 420 MHz 800 - 999.9875 MHz (cellular blocked)
Set Mode Item [
F28 RX F CCLF28 RX F CCL
F28 RX F CCLF28 RX F CCL
F28 RX F CCL]
Function: Shifting of the CPU clock frequency.
Available Values: OFF/ON
Default: OFF
This function is only used to move a spurious response “birdie,” should it fall on a desired
frequency.
Set Mode Item [
F29 RX M MODF29 RX M MOD
F29 RX M MODF29 RX M MOD
F29 RX M MOD]
Function: Selects the receiving mode.
Available Values: AUTO/WIDE FM/FMNARR FM/AM
Default: AUTO
