93FTM-10R OPERATING MANUAL
MENU
(
“SET”
)
MODE
Set Mode Item
[
F3 AF PITCHF3 AF PITCH
F3 AF PITCHF3 AF PITCH
F3 AF PITCH
]
Function: Select the Tone Pitch control for the received audio.
Available Values: LOW-3/LOW-2/LOW-1/NORMAL/HIGH-1/HIGH-2
Default: NORMAL
Set Mode Item
[
F4 AF PRESTF4 AF PREST
F4 AF PRESTF4 AF PREST
F4 AF PREST
]
Function: Enable/Disable the Volume Setting Alert feature.
Available Values: OFF/OV ALERT/LV ALERT/ HV ALERT
Default: OFF
OV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob
blinks orange when volume level is set to the ±3 steps of the preset level.
LV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob
blinks orange when volume level is set to the preset level minus 3 steps.
HV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob
blinks orange when volume level is set to the preset level plus 3 steps above.
OFF: Disables the Volume Setting Alert feature.
Set Mode Item
[
F5 AF-VFOF5 AF-VFO
F5 AF-VFOF5 AF-VFO
F5 AF-VFO
]
Function: Select the DIAL knob and display function.
Available Values: TOGGLE/AUTOBACK
Default: AUTOBACK
TOGGLE: Keeps the DIAL knob function and display until the
[
VOL/SEL
]
key is pressed
once again.
AUTOBACK: The DIAL knob function and display comes back to frequency selection and
frequency display after approximately 3 secs.
Set Mode Item
[
F6 BEEPF6 BEEP
F6 BEEPF6 BEEP
F6 BEEP
]
Function: Enables/Disables the beeper.
Available Values: KEY+SC/KEY/OFF
Default: KEY+SC
KEY+SC:The beeper sounds when you press any key, or when the scanner stops.
KEY: The beeper sounds when you press any key.
OFF: Beeper is disabled.
Set Mode Item
[
F7 BLU SAVEF7 BLU SAVE
F7 BLU SAVEF7 BLU SAVE
F7 BLU SAVE
]
Function: Enable/Disable the battery saver of the optional BH-1 Bluetooth Headset.
Available Values: OFF/ON
Default: OFF
