22 FTM-10R OPERATING MANUAL
RECEIVE
1. To turn the transceiver on, press and hold in the top panel
[
POWER
]
key for two
seconds.
When you turn the transceiver on, the applied DC voltage is displayed on the LCD for
2 seconds. Then the operating frequency will be displayed.
To turn the transceiver off, press and hold in the
[
POWER
]
key for two seconds.
2. Press the front panel / keys to switch the operating band as follows:
Key
£ 2 m Amateur Band (H-V) £ 430 MHz Amateur Band (H-U) £ FM BC Band (FM) £
AM BC Band (AM) £ WX Band (WX) £ Audio Line
Ú
£ Group Memory (GRP) £ 2
m Amateur Band (H-V) £
Key
2 m Amateur Band (H-V) £ Group Memory (GRP) £ Audio Line
Ú
£ WX Band (WX)
£ AM BC Band (AM) £ FM BC Band (FM) £ 430 MHz Amateur Band (H-U) £ 2 m
Amateur Band (H-V) £
Ú When external audio equipment, like an iPod
®
, is connected, an after-market cable is
required.
When external audio equipment is connected, the input audio level must be adjusted
on the external audio equipment.
BASIC OPERATION
[
POWER
]
key
H-U 430 MHz Amateur Band
H-V 144 MHz Amateur Band
GRP Group Memory
-- Audio Line
WX WX Band
AM AM BC Band
FM FM BC Band
DIAL knob
[
VOL/SEL
]
key
/ key
