SECTION 7—SEAT
Part No. 1122145 53 Pronto® M94™
FIGURE 7.6 Adjusting Seat Position on Seat Frame
Adjusting Seat Depth - Van Seat Only
NOTE: For this procedure, refer to FIGURE 7.7 on page 54.
1. Remove the seat. Refer to Removing/Installing the Seat Assembly
on page 50.
2. Remove the seat base from the seat assembly. Refer to Adjusting Seat Position on Seat
Frame on page 52.
3. Remove the six mounting screws located under the seat that secure the seat back
assembly in place.
Bottom View of Seat Assembly
Front of Seat
Rear of Seat
Use these Mounting Holes
for 1-inch-back Seat Position
Use these Mounting Holes for
1-inch-back Seat Position
Use these Mounting Holes
for 1-inch-back Seat Position
Use these Mounting Holes
for 1-inch-back Seat Position
Use these Mounting Holes
for Standard Seat Position
Use these Mounting Holes
for Standard Seat Position
Use these Mounting Holes
for Standard Seat Position
Use these Mounting Holes
for Standard Seat Position
DO NOT Use
these mounting
holes.
* DO NOT Use
* DO NOT Use
* DO NOT Use
* DO NOT Use
*NOTE: Only the 22-inch wide seats have these mounting holes.
DO NOT use these mounting holes.
Seat Assembly
Seat
Positioning
Strap
Seat Frame
Washer
Mounting Screws
DETAIL “B” - SEAT POSITIONS
DETAIL “A” -
SEAT ASSEMBLY
