SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Pronto® M94™ 24 Part No. 1122145
Inspect/Adjust Weekly
❑ Ensure the seat is secured to wheelchair frame.
❑ Ensure the seat and/or back upholstery have no rips and DO NOT sag. Replace if
necessary.
❑ Ensure the seat release latch is not worn and is functional. Replace if necessary.
❑ Ensure the inspect tires for flat spots and wear.
❑ Ensure the arm pivot points are not worn and/or loose. Replace if necessary.
❑ Ensure the inspect and clean the stability lock gears. Replace if worn.
❑ Ensure that casters are free of debris.
Inspect/Adjust Monthly
❑ Ensure the wheel mounting nuts are secure on drive wheels.
❑ Ensure the no excessive side movement or binding when drive wheels are lifted and
spun when disengaged (free-wheeling).
❑ Ensure the wheel/fork assembly has proper tension when caster is spun. Caster should
come to a gradual stop.
CAUTION
As with any vehicle, wheels and tires should be checked periodically for cracks and
wear and should be replaced as necessary.
❑ Ensure the loosen/tighten caster locknut if wheel wobbles noticeably or binds to a
stop.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Inspect for any loose hardware on the wheelchair.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Ensure that casters are free of debris.
Inspect/Adjust Periodically
❑ Ensure the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Ensure the arms are secure but easy to release and adjustment levers engage properly
(on ASBA only).
❑ Ensure the adjustable height arms operate and lock securely.
❑ Ensure the arm pivot points are not worn and/or loose. Replace if necessary.
❑ Ensure the armrest pads sit flush against arm tubes.
❑ Ensure the seat and/or back upholstery have no rips and DO NOT sag. Replace if
necessary.
