23
5 MEMORY CHANNELS
New2001
■
Transferring memory contents
Contents of programmed memory channels can be trans-
ferred to another memory.
qPush [V/M•S.MW•~] for 1 sec. to enter select memory
write condition.
• 1 short and 1 long beeps sound.
•“ ” indicator and memory channel number blink.
• Do not hold [V/M•S.MW•~] for more than 2 sec. otherwise the
memory contents will be copied to VFO.
wRotate [DIAL] to select the desired memory channel to be
transferred.
eWhile pushing [MODE•SCAN], rotate [DIAL] to select
“CLEAR” item.
• Pushing [MODE•SCAN] several times also “CLEAR” item is se-
lectable.
rPush [V/M•S.MW•~] for 1 sec.
• The displayed contents are cleared.
CONVENIENT!:
Instead of the steps e and r operations, while pushing
and holding [FUNC], push [V/M•S.MW•~] for 1 sec. also
clearing the contents.
tRotate [DIAL] to select the desired target memory channel.
yPush [V/M•S.MW•~] for 1 sec. to transfer the contents.
FM DUP SQLT
FM DUP SQLT
[V/M•S.MW•~]
[MODE•SCAN]
[FUNC]
[DIAL]
• Example— Transferring the
contents of memory channel
20 to channel 30.
Steps q and w
Step e
Step r
Step t
Step y
IC-R5_1.qxd 02.10.23 11:28 Page 23 (1,1)
