Print Quality Problems 65
■ In the Advanced options, turn MicroWeave
®
off and/or turn High Speed on.
■ If your printer is connected to a hub, disconnect USB devices that you’re not using.
Note: Borderless printing takes longer than normal, especially near the edges of
the paper. Printing without a computer is also a bit slower.
■ If you are printing a landscape photo without a computer, it takes longer for the printer to
rotate and process the image.
Your memory card does not work correctly.
■ If you’re using different kinds of memory cards, make sure only one card is inserted at a
time.
■ Make sure the card contains no more than 999 photos (or the last photos won’t display),
and that the photos are in JPEG or Uncompressed Tiff format and taken with a
DCF-compliant digital camera.
■ Make sure you follow the instructions on the Start Here sheet to install the software,
including the card utilities: Card Monitor and PhotoStarter.
■ Check your PhotoStarter settings. See page 18 for instructions.
■ If you access the card from your computer and delete files, the card may not work
correctly with your camera. Always delete pictures using your camera.
■ If you’re using Windows XP, you may need to install your Windows storage device driver.
Print Quality Problems
You see banding (light lines).
■ The print head nozzles may need cleaning; see page 50 for instructions.
■ Select a higher print quality and turn off High Speed mode. See page 30 (Windows) or
page 32 (Macintosh).
■ If you’re printing without a computer, make sure the printer’s Paper Type setting matches
the type of paper you’re using; see page 22 for guidelines.
■ If you’re printing from a computer, make sure the paper Type or Media Type setting
matches the paper you loaded; see page 37 for guidelines.
■ Make sure you load paper with the printable side face up. The printable side is usually the
whiter or brighter side of the paper.
