110 C1624M-F (9/07)
A relay array is a grouping of relays that are associated with the same device in your Endura network. These relays can be configured by
selecting the relay array and then setting up the individual relays within the array.
Figure 124. Relay Array Configuration
To configure a relay or relay array:
1. Click the Setup button .
2. Click the Devices tab.
3. In the device tree, click the relay or relay array you want to configure. The screen updates to display the current settings for that device.
4. Enter a user-friendly name for the relay. Assigning a friendly name makes it easier to recognize individual devices on your network.
5. Assign a location to the relay. Refer to Configuring Individual Devices on page 88.
6. Physical output is a read-only field that tells you what type of connection exists between the relay and the encoder.
7. Select the relay mode from the drop-down list:
• On (default)
•Off
• Toggle
•Pulse
If you are using the pulse mode:
• Set the relay period. This setting defines the total time in tenths of a second (5–1,000) for the relay control pulse (1 second is the default
value).
• Set the percentage of time during the defined period that the relay will be in the ON state. The default value is 50%.
• Set the number of times (0–99) the relay will be pulsed (that is, placed in the ON state) during the defined period. Five is the default value.
